HP PAVILION 2510i LCD monitor 25 inches

MPN

MPN: WD005AAB1S

Main features

Response time: the response time is a characteristic of LCD screens. This is the time required for a liquid crystal cell to pass state active (black) to inactive state (white) and back to active (black) State. This parameter is expressed in milliseconds (ms). Less response time is high, more transitions are fast (16 ms being faster than 25 ms for example) and less artifacts related to the image are visibles.2.5 ms
Height/width ratio: 16: 9
14: 9 extended
Monitor type: there are different types of screens. The standard CRT screens are the most common and the most used. They are also the least expensive. The LCD and TFT screens are equipped with a flat tube and are, therefore, less bulky. They are however more expensive than the CRT, even though their price has recently fallen.Flat Panel LCD TFT (active matrix)
Size: 25 inches
(Recommended) native resolution: 1920 x 1080

Connectivity

Standard format for digital video input: DVI - D

Technical characteristics

Prise%28s%29+d%27entr%C3%A9e+vid%C3%A9o+analogique+%3A+Les+entr%C3%A9es+vid%C3%A9o+analogiques%2C+%C3%A9galement+appel%C3%A9es+entr%C3%A9es+D-Sub%2C+permettent+%C3%A0+un+moniteur+de+recevoir+des+signaux+vid%C3%A9o+analogiques+%28VGA%29.+Ces+entr%C3%A9es+peuvent+recevoir+des+connecteurs+dot%C3%A9s+de+trois+rang%C3%A9ES pin, for a total of 15 pins. Higher the number of analog video inputs of a monitor, more analog input devices which can be connected are nombreux.1 D - Sub 15-pin connector
Location: Office
Supported resolutions: 1920 x 1080
Synchronization range - vertical: 50-76 Hz
Synchronization range - horizontal: 24-94 kHz
Max - Horizontal viewing angle: 170
Luminosity: The luminosity (also called luminance or photometric brightness) corresponds to the intensity of the light reflected by any surface in a given direction. It is measured in units of part of the area projected in the direction of an observer from a point unique.300 cd/m²
Angle of vision Max - Vertical: 160
Not mask: the mask no is a parameter that is used to measure the quality of the display. Less this parameter is high, the image is clear (and vice versa).0.288 mm
Regulatory compliance: this
NAME
VCCI
CISPR
FCC
ISO 13406-2 (Pixel Defect Guidelines)
MPR |
SASO
SEMKO
Ass
TUV
GOST

Various

Consumption: 60 Watt
User controls: contrast
UPC: 884962716946
N % C2% B0 + of + product + %3 has + 95910739